When shopping for the ideal scooter, one question you should ask is, “What traits describe an exceptional scooter?” If you are thinking high quality, practical, and fun, then the eZip e450 Electric Scooter is definitely a vehicle that you will want more to learn more about! Available in Red and Green.
Buy Online: http://amazon.com
This scooter, catered to teenagers ages 13 and older, is created by the well known Currie Technologies company. It measures 44′ x 18′ x 38′ and weighs 52 pounds; this provides an appropriate size for its riders.
The eZip e450 website informs readers that this scooter is powered by a DC earth magnet motor that has 450 watts of power. The scooter has a frame that is made from hi-ten steel; this gives the body of the scooter its strength and durability.
It contains alloy wheels that are created specifically for the Currie brand. The tires on the scooter are 10 inch, low profile, street slick tires that are also exclusive to the Currie line of products. The braking system consists of a front linear pull brake and an Alloy Motor Inhibit Lever.
To aid drivers as they are going to various destinations, the scooter’s fork has a linear pull brake and a Unicrown design that limits oversteering by the operator of the vehicle.
In addition to all of the amazing features that help the scooter operate, there are also features that allow it to be very practical for its users. Its handlebars can be easily folded; the folding allows the scooter to take up less room in storage.
Also, the seat can be taken off; this is useful because individuals have the option to sit or stand while operating the vehicle.
The eZip e450 Electric Scooter takes, on average, half of an hour to assemble. Currie Technologies, the company who owns and sells this scooter, created a very useful and detailed assembly guide to help with assembling the scooter.
According to the instructions, when beginning the set-up, the individual who is putting the scooter together should gather all of the necessary tools. Packaged with the scooter, the following tools are contained: a toolkit that has two wrenches, paint that can be used for touch-ups, and reflectors. The assembler should have scissors or a wire cutter, and a wrench that is 10mm and open-ended.
To begin the process, the scooter should be unpackaged. Then, the seat mast, steering column, and handlebars should be attached. Lastly, the linear-pull brakes should be set up and checked. Once these steps have been followed, the scooter is ready!
The driver can test out the scooter before charging the battery; however, the battery comes only partially charged. The battery will need to be fully charged before it is taken out for longer distances.
If the person who is assembling the scooter encounters any problems as they are working through the process, Currie Technologies has a phone number that can be called to give customers support through this process. Also, the company created an assembly video that can be watched to help walk individuals through the process.
When charging the battery, the operator should devote between six and eight hours for this process. Then, after each additional usage, the battery should be charged so that it is ready to be driven in the future.
As the battery is being charged, the instructions that are given should be carefully followed. It is important to not overcharge the battery; charging the battery for periods that are in excess of 24 hours can cause it to not work as well in the future.
This scooter can travel at speeds of up to 15 miles per hour. Even though the maximum speed is typically 15 miles per hour, this can change due to land features and the operator’s weight.
Based on the design of this scooter, it can support up to 180 pounds.
It is very important that individuals follow all safety rules as they operate this scooter. Like every electric vehicle, there are risks while operating this product. Drivers should be sure to use the correct safety equipment, especially a helmet, while enjoying their time on the scooter. The owner’s manual gives many great safety tips that should be followed while operating the vehicle.
In addition to the safety tips, a helpful pre-riding checklist is provided. The checklist contains things that should be done before every ride. Some of the items include: checking the tires for extreme wear, making sure the handlebars are aligned correctly and are secure, checking to see that the accelerator is working properly, and ensuring that the shoe pads of the brakes are in good condition.
A negative that I noticed while researching the scooter is regarding its wheels and tires; the complaint was that the wheels went flat and an individual had issues with the tire bearings. Since the percentage of satisfied customers is much larger than the small amount of complaints, it leads me to believe that this is not very common with the scooter.
Similar to the other products produced by Currie Technologies, this scooter is equipped with a limited, manufacturer warranty that lasts for 90 days.
As you are deciding on a scooter that is ideal for your teenager, remember the eZip e450 Electric Scooter. This scooter is an great option because of its excellent customer feedback, its exciting speed, and its well-explained assembly process.